SuperServer 6019P-WT8 User's Manual
27
Figure 3-5. Removing the PHM
Printed Triangle on Motherboard
Removing the screws in
the sequence of 4, 3, 2, 1
#1
#2
#3
#4
After removing the screws,
lift the Processor Heatsink
Module off the CPU socket.
CPU Socket
Removing the Processor Heatsink Module from the Motherboard
Before removing the processor heatsink module (PHM), power down as described in Section
3.1.
1. Using a T30 Torx-bit screwdriver, turn the screws on the PHM counterclockwise to
loosen them from the socket, starting with screw marked #4, in the sequence of 4, 3, 2,
1.
2. After all four screws are removed, wiggle the PHM gently and pull it up to remove it
from the socket.
