Supermicro SuperServer 6017R-WTRFTP, Руководство пользователя

Страница: 69 / 128

Chapter 5: Advanced Serverboard Setup
5-23
DOM Power Connector
A power connector for SATA DOM
(Disk On Module) devices is located at
JSD1. Connect an appropriate cable
here to provide power support for your
DOM devices.
DOM PWR
Pin Definitions
Pin# Definition
1 +5V
2 Ground
3 Ground
Note: NC indicates no connection.
Ethernet Ports
Two Gigabit Ethernet ports (LAN1/2) and two 10G LAN ports (TLAN1, TLAN2) are
located on the I/O backplane to provide Internet connections. TLAN1 & TLAN2 also
support 10-Gigabit small form-factor pluggable (SFP+) transceivers optimized for
onboard telecommunication and data communications. In addition to LAN/TLAN
ports, a dedicated IPMI LAN port, located above the USB 0/1 ports on the backplane,
provides KVM support for IPMI 2.0.
Note : Please refer to the LED Indicator Section for LAN LED information.
T-SGPIO/S-SGPIO Headers
Three Serial Link General Purpose
Input/Output headers are designated
as T-SGPIO 1/2 and S-SGPIO 1. T-
SPGIO 1/2 support the I-SATA 0~5
and S-SGPIO 1 supports the S-SATA
0-3 ports. See the table on the right
for pin definitions.
T-SGPIO/S-SGPIO
Pin Definitions
Pin# Definition Pin Definition
1 NC 2 NC
3 Ground 4 Data
5 Load 6 Ground
7 Clock 8 NC