Supermicro SUPERSERVER 6014V-M4, Руководство пользователя

Страница: 51 / 122

Chapter 5: Advanced Serverboard Setup
5-15
ATX PS/2 Keyboard and
PS/2 Mouse Ports
The ATX PS/2 keyboard and the PS/2
mouse ports are located at J2. See
the table on the right for pin defi ni-
tions.
PS/2 Keyboard and
Mouse Port Pin
Defi nitions (J2)
Pin# Defi nition
1 Data
2 NC
3 Ground
4 VCC
5 Clock
6 NC
Extra Universal Serial Bus
Headers
Two additional USB headers (USB2/3)
are located on the serverboard.
These are included for connection to
the ports on the front of the chassis.
A USB cable (not included) is needed
for the connection. See the table on
the right for pin defi nitions.
Front Panel Universal Serial Bus
Pin Defi nitions (USB2/3)
USB2
Pin # Defi nition USB3
Pin # Defi nition
1 +5V 1 +5V
2 PO- 2 PO-
3 PO+ 3 PO+
4 Ground 4 Ground
5 Key 5 No connection
Power LED/Speaker
On JF2, pins 1, 3, 5 and 7 are for the
speaker, pins 2, 4, and 6 are for the
power LED and pins 8 and 10 are for
the keylock. See the tables on the
right. Note: The speaker connec-
tor pins are for use with an external
speaker. If you wish to use the on-
board speaker, you should close pins
5 and 7 with a jumper.
Speaker Connector
Pin Defi nitions (JF2)
Pin# Defi nition
1 Red wire, Speaker data
3 No connection
5 Buzzer signal
7 Speaker data
PWR LED/Keylock Connector
Pin Defi nitions (JF2)
Pin# Defi nition
2 +Vcc
4 -Vcc
6 -Vcc
8 Keylock
10 Keylock
2
4
6
8
10
1
3
5
7
9
JF2 Pin Layout