SuperServer 5019C-M4L User's Manual
20
Figure 2-2. Installing the Chassis Rails
Figure 2-1. Identifying the Sections of the Rack Rails
2.4 Installing with a Rail Kit
This is a guideline for installing the unit into a rack with the optional sliding rail kit (MCP-290-
00004-03). There are a variety of rack units on the market, which may mean the assembly
procedure will differ slightly. Refer also to instructions that came with the rack.
The rail hardware includes two assemblies that consists of two sections: an inner rail that
secures to the chassis and an outer rail that secures to the rack. Note that the rails are left/
right side specific.
Installing the Inner Rails
1. Detach the two rail sections from each other by depressing the locking tab on the inner
rail to release it from its locked position, then slide the inner rail completely out.
2. Position the inner rail along the side of the chassis making sure the three screw holes
line up.
3. Screw the rail securely to the side of the chassis.
You will also need to attach the inner rails when installing into a telco rack.
Inner Rail
Outer Rail
Locking Tab
