manualshive.com logo in svg

Supermicro SuperServer 5019A-12TN4, Руководство пользователя, Страница: 63 / 115

Поделиться
Скачать
Supermicro SuperServer 5019A-12TN4 Скачать руководство пользователя страница 63

Chapter 6: BIOS

63

SATA Configuration

mSATA Selection

Two interface options are available, either mSATA or 

mSATA/Mini PCIe

.

SATA0

SATA 0 Enable controller

This item enables or disables the onboard SATA controller supported by the processor. The 
options are 

Enabled

 and Disabled. 

SATA 0 LPM (Link Power Management)

When this item is set to Enabled, the SATA AHCI controller manages the power usage of 
the SATA link. The controller will put the link in a low power mode during extended periods 
of I/O inactivity and will return the link to an active state when I/O activity resumes. The 
options are Enabled and 

Disabled

. 

*If the feature above is enabled, the SATA 0 ALPM feature is available for configuration:

SATA 0 ALPM

Use this feature to disable or enable the Aggressive Link Power Management. The options 
are Enabled and 

Disabled

. 

I-SATA (M.2)

This following information is displayed:

• 

Device Information

• 

Device Size

I-SATA (M.2) Enable/disable port

Use this feature to disable or enable the SATA port number. The options are 

Enabled

 

and Disabled. 

I-SATA (M.2) Spin up

When the value of an edge detect or the value of an image binary (pixel) of a device is 
from 0 to 1, select Enabled to allow the PCH to start a COMRESET initialization sequence 
on this device. The options are Enabled and 

Disabled

. 

Содержание SuperServer 5019A-12TN4




















































































































Отзывы:

Нет отзывов