41
Chapter 3: Maintenance and Component Installation
Figure 3-13. Removing a Dummy Drive from the Carrier
Note:
Enterprise level hard disk drives are recommended for use in Supermicro chassis and
servers. For information on recommended HDDs, visit the Supermicro website at
http://www.
supermicro.com/products/nfo/files/storage/SBB-HDDCompList.pdf
4. Insert the drive carrier with the disk drive into its bay, keeping the carrier oriented so
that the hard drive is on the top of the carrier and the release button is on the right side.
When the carrier reaches the rear of the bay, the release handle will retract.
5. Push the handle in until it clicks into its locked position
