Supermicro SuperServer 1019C-HTN2 Скачать руководство пользователя страница 81

Страница: 81 / 124

Chapter 6: BIOS

PCI PERR/SERR Support

Use this feature to enable or disable the runtime event for PCI errors. The options are

Disabled

and Enabled.

Above 4G MMIO BIOS Assignment

Select Enabled to decode a PCI device that supports 64-bit in the space above 4G Address.
The options are

Disabled

and

Enabled.

BME DMA Mitigation

Enable this feature to help block DMA attacks. The options are Enable and

Disable

Onboard Video Option ROM

Use this feature to select which firmware function to be loaded for LAN Port1 used for system

boot. The options are Disabled,

Legacy

, and EFI.

PCIe/PCI/PnP Configuration

PCH SLOT4 PCI-E 3.0 X4 (IN X8) OPROM

Use this feature to select which firmware to be loaded for the add-on card in this slot. The

options are Disabled,

Legacy

, and EFI.

CPU SLOT6 PCI-E 3.0 X16 OPROM

Use this feature to select which firmware to be loaded for the add-on card in this slot. The

options are Disabled,

Legacy

, and EFI.

PCH SLOT7 PCI-E 3.0 X4 (IN X8) OPROM

Use this feature to select which firmware to be loaded for the add-on card in this slot. The

options are Disabled,

Legacy

, and EFI.

PCI-E M.2-M1 OPROM

Use this feature to select which firmware to be loaded for the add-on card in this slot. The

options are Disabled,

Legacy

, and EFI.

Onboard LAN1 SUPPORT

Use this feature to select which firmware to be loaded for LAN Port1 used for system boot.

The options are Disabled and

Enabled

Onboard LAN Option ROM Type

Use this feature to select which firmware to be loaded for onboard LAN devices. The options

Legacy

and EFI. Select Legacy to display and configure the Onboard LAN1 ~ LAN8 Option

ROM features.

Onboard LAN1 Option ROM

Содержание SuperServer 1019C-HTN2





























































































































Результаты поиска

Содержание SuperServer 1019C-HTN2

Отзывы:

Supermicro SuperServer 1019C-HTN2, Руководство пользователя, Страница: 81 / 124

Результаты поиска

Содержание SuperServer 1019C-HTN2

Отзывы: