Supermicro Supero X9SRH-7F, Руководство пользователя

Страница: 85 / 115

Chapter 4: AMI BIOS
4-9
MMCFG BASE
This feature allows the user to specify a base address computation (for
ACPI base address reporting) for regions that do not start at bus 0. The
options are
0x80000000 , 0xA0000000, and 0xC0000000.
IIO 1 PCIe Port Bifurcation Control
CPU1 Slot 3 PCI-E 3.0 x8 (in x16) Link Speed
This feature enables the user to select the target link speed for this slot.
The options are GEN1, GEN2 and GEN3 .
CPU1 Slot 6 PCI-E 3.0 x16 Link Speed
This feature enables the user to select the target link speed for this slot.
The options are GEN1, GEN2 and GEN3 .
 DIMM Configuration
Memory Configuration
This section displays memory status such as Current Memory Mode,
Memory Speed, Mirroring and Sparing information.
 DIMM Information
This feature displays information regarding the installed memory.
Memory Mode
The options are Independent , Mirroring, Lockstep and Sparing.
Independent - All DIMMs are available to the operating system.
Mirroring - The motherboard maintains two identical copies of all
data in memory for redundancy.
Lockstep - The motherboard uses two areas of memory to run the
same set of operations in parallel.
Sparing - Memory sparing occurs when on-demand inactive mem-
ory is automatically activated by the system to temporarily replace
failed memory until a service action can be performed.
Note: The options may vary depending on the number of DIMMs
installed per channel.
DRAM RAPL Mode
RAPL which stands for Running Average Power Limit is a feature that
provides mechanisms to enforce power consumption limits on supported