Supermicro Supero X8DA6, Руководство пользователя

Страница: 75 / 91

Chapter 4: AMI BIOS
4-15

Super IO Device Configuration
Onboard Floppy Controller
Select Enable to enable the onboard Floppy Controller. The options are Enabled
and Disabled.
Floppy A
This feature allows the user to select the type of floppy drive connected to the sys -
tem as specified. The options are Disabled, 360KB 5 1/4", 1.2MB 5 1/4", 720KB 3
1/2", 1.44MB 3 1/2" and 2.88MB 3 1/2". The default setting for Floppy A is 1.44MB
3 1/2".
Serial Port1 Address/ Serial Port2 Address
This option specifies the base I/O port address and the Interrupt Request address
for Serial Port 1 or Serial Port 2. Select Disabled to prevent the serial port from
accessing system resources. When this option is set to Disabled, a serial port will
physically become unavailable. Select 3F8/IRQ4 to allow the serial port to use 3F8
as its I/O port address and IRQ 4 for the interrupt address. The options for Serial
Port1 are Disabled,
3F8/IRQ4
, 3E8/IRQ4, 2E8/IRQ3, and 2F8/IRQ3. The options for
Serial Port2 are Disabled, 2F8/IRQ3 , 3E8/IRQ4, 3F8/IRQ4, and 2E8/IRQ3.
Serial Port 2 Mode
Use this feature to configure Serial Port 2 mode. The options are Normal, IrDA
and ASK IR. IrDA (Infrared Data) is an industry standard for remote control de-
vices. ASK IR (Amplitude Shifted Keying Infrared) is a protocol compatible with
Sharp® branded PDAs and other infrared devices.

Remote Access Configuration
Remote Access
This feature allows the user to enable Remote Access support. The options are
Disabled and Enabled.
If Remote Access is set to Enabled, the following items will display:
Serial Port Number
This feature allows the user to decide which serial port to be used for Console
Redirection. The options are
COM 1
and COM2
.
Base Address, IRQ
This item displays the base address and IRQ of the serial port used for
Console Redirection.