manualshive.com logo in svg

Supermicro SUPERO X10DRU-X, Руководство пользователя

Поделиться
Скачать
Supermicro SUPERO X10DRU-X Скачать руководство пользователя страница 84

4-20

 

X10DRU-X/X10DRU-LL Motherboard User’s Manual

sSATA Controller

This item enables or disables the onboard SATA controller supported by the Intel 
PCH-sSATA controller. The options are 

Enabled

 and Disabled. 

Configure sSATA as

Select IDE to configure an sSATA drive specified by the user as an IDE drive. Select 
AHCI to configure an sSATA drive specified by the user as an AHCI drive. Select 
RAID to configure an sSATA drive specified by the user as a RAID drive. The op

-

tions are IDE, 

AHCI

, and RAID.  

*If 

the  item  above  "Configure  sSATA  as"  is  set  to AHCI,  the  following  items  will 

display:

Support Aggressive Link Power Management

When this item is set to Enabled, the SATA AHCI controller manages the power 
usage of the SATA link. The controller will put the link to a low power state when 
the I/O is inactive for an extended period of time, and the power state will return 
to normal when the I/O becomes active. The options are 

Enabled

 and Disabled.

sSATA Port 0~ Port 1

This item displays the information detected on the installed on the sSATA port. 

specified by the user.

• 

Model number of drive and capacity

• 

Software Preserve Support 

sSATA Port 0~ Port 1

Select Enabled to enable an sSATA port specified by the user. The options are 

Disabled and Enabled.

sSATA Port 0 ~ Port 1 Hot Plug

Select Enabled to enable hot-plugging support for a port specified by the user, 

which will allow the user to replace a sSATA disk drive installed on this port 
without shutting down the system. The options are 

Enabled

 and Disabled.

sSATA Port 0 ~ Port 1 Spin Up Device

On an edge detect from 0 to 1, set this item to allow the PCH to start a COMRE-
SET initialization to the device. The options are Enabled and 

Disabled

.

Port 0 ~ Port 1 sSATA Device Type

Use this item to specify if the sSATA port specified by the user should be con

-

nected to a Solid State drive or a Hard Disk Drive. The options are Hard Disk 
Drive and Solid State Drive. 

Содержание SUPERO X10DRU-X














































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды