Supermicro SUPERO X10DRU-i+, Руководство пользователя

Страница: 17 / 115

Chapter 1: Overview
1-9
•
Power-on mode for AC power recovery
•
Intel
®
Intelligent Power Node Manager 3.0 (Available
when the Supermicro Power Manager "SPM" is in-
stalled and special power supply used. See the note
on Page 1-14.)
•
Management Engine (ME)
System
Health
System Health/CPU Monitoring
Monitoring
•
Onboard voltage monitoring for 3.3Vcc, 5Vcc, 12V,
Vcpu1/Vcpu2, VBAT, VDIMMAB, VDIMMCD, VDIMM
EF, and VDIMMGH voltages
•
CPU/System overheat LED and control
•
CPU Thermal Trip support
•
Memory Fault Detection LEDs to indicate ECC errors
occurred on the DIMM module installed on each slot
•
Status Monitor for Speed Control
•
Status Monitor for On/Off Control
•
CPU Thermal Design Power (TDP): support up to
160W (See Note 1 next page)
Fan Control
•
Fan status monitoring via IPMI connections
•
Dual Cooling Zone
•
Low noise fan speed control
•
Pulse Width Modulation (PWM) fan control
System
Management
•
PECI (Platform Environment Configuration Interface)
2.0 support
•
UID (Unit Identification)/Remote UID
•
System resource alert via SuperDoctor 5
•
SuperDoctor® 5, Watch Dog, NMI
•
Chassis Intrusion Header and Detection
Dimensions
•
17.00" (L) x 16.80" (W) (431.80 mm x 426.72 mm)
Note 1 : CPU Maximum Thermal Design Power (TDP) is subject to chassis
and heatsink cooling restrictions. For proper thermal management, please
check the chassis and heatsink specifications for proper CPU TDP sizing.
Note 2
: For IPMI Configuration Instructions, please refer to the Embedded
IPMI Configuration User's Guide available @ http://www.supermicro.com/
support/manuals/.