Supermicro Supero SUPERSERVER 2027PR-DNCFR, Руководство пользователя

Страница: 56 / 144

5-2
SUPERSERVER 2027PR-DNCR/DNCFR/DNCTR USER'S MANUAL
5-3 Rear I/O Ports
The I/O ports are in conformance with the PC 99 specifi cation. See Figure 5-1 below
for the locations of the various I/O ports.
Figure 5-1. Rear I/O Ports
Back Panel I/O Port Locations and Defi nitions
1 Backplane USB0
2 Backplane USB1
3 IPMI LAN
4 Gigabit LAN1 (for X9DRT-P/X9DRT-PIBF), 10G LAN (for X9DRT-PT)
5 Gigabit LAN1 (for X9DRT-P/X9DRT-PIBF), 10G LAN (for X9DRT-PT)
6 Infi niBand (IB) Connector (for X9DRT-PIBF)
7 Backplane VGA (Blue)
8 UID LED (on the motherboard)
9 UID Switch
2
1 6
3
4 7 8 9
5-2 Connecting Cables
Now that the processors are installed, the next step is to connect the cables to
the serverboard.
Connecting Data Cables
The cables used to transfer data from the peripheral devices have been carefully
routed in preconfi gured systems to prevent them from blocking the fl ow of cooling
air that moves through the system from front to back. If you need to disconnect
any of these cables, you should take care to reroute them as they were originally
after reconnecting them (make sure the red wires connect to the pin 1 locations). If
you are confi guring the system, keep the airfl ow in mind when routing the cables.
5