Supermicro Supero SUPERSERVER 2027PR-DC1FR Скачать руководство пользователя страница 133

Страница: 133 / 144

Chapter 7: BIOS

7-31

When SEL is Full

This feature allows the user to decide what the BIOS should do when the system

event log is full. Select Erase Immediately to erase all events in the log when the

system event log is full. The options are

Do Nothing

and Erase Immediately.

Custom EFI Logging Options

Log EFI Status Codes

Select Enabled to log EFI (Extensible Firmware Interface) Status Codes, Error

Codes or Progress Codes. The options are

Enabled

and Disabled.

Note

: After making changes on a setting, be sure to reboot the system for

the changes to take effect.



BMC Network Confi guration

LAN Channel 1

: This feature allows the user to confi gure the settings for LAN1 Port.

IPMI LAN Selection

This feature displays the IPMI LAN Selection setting. The default setting is

Failover.

IPMI Network Link Status

This feature displays the IPMI Network Link status. The default setting is

Dedicated

LAN.

Update IPMI LAN Confi guration

This feature allows the BIOS to implement any IP/MAC address changes at the next

system boot. If the option is set to Yes, any changes made to the settings below will

take effect when the system is rebooted. The options are

and Yes.

Confi guration Address Source

This feature allows the user to select the source of the IP address for this computer.

If Static is selected, you will need to know the IP address of this computer and enter

it to the system manually in the fi eld. If DHCP is selected, the BIOS will search for a

DHCP (Dynamic Host Confi guration Protocol) server in the network that is attached

to and request the next available IP address for this computer. The options are

DHCP

and Static. The following items are assigned IP addresses automatically if

DHCP is selected, or can be confi gured manually if Static is selected.

Update IPMI LAN Confi guration

This feature allows the BIOS to implement any IP/MAC address changes at the next

system boot. If the option is set to Yes, any changes made to the settings below will

take effect when the system is rebooted. The options are

and Yes.

Содержание Supero SUPERSERVER 2027PR-DC1FR

















































































































































Результаты поиска

Содержание Supero SUPERSERVER 2027PR-DC1FR

Отзывы:

Похожие инструкции для Supero SUPERSERVER 2027PR-DC1FR

Бренды по названию

Популярные бренды

Supermicro Supero SUPERSERVER 2027PR-DC1FR, Руководство пользователя

Результаты поиска

Содержание Supero SUPERSERVER 2027PR-DC1FR

Отзывы:

Похожие инструкции для Supero SUPERSERVER 2027PR-DC1FR

Бренды по названию

Популярные бренды