Supermicro SUPERO SuperServer 1018L-MP, Руководство пользователя

Страница: 67 / 104

Chapter 6: Advanced Chassis Setup
6-5
6-6 Installing the Motherboard
Note : If you purchased a power converter board, install it before installing the
motherboard. The procedure is in section 6-5.
1. Review the documentation that came with your motherboard. Become familiar
with component placement, requirements, precautions, and cable connections.
2. Remove the chassis cover.
3. If installed, remove the hard drive tray by removing the two screws that secure
it to the chassis bracket.
4. Remove the chassis bracket that supports the drive tray.
5. Place the motherboard into the chassis.
Figure 6-7. Removing the Hard Drive Tray Support Bracket
Bracket