Supermicro Supero 7047A-73 Скачать руководство пользователя страница 75

Страница: 75 / 104

Chapter 7: BIOS

7-3

System Time

This item displays the system time in HH:MM:SS format (e.g. 15:32:52).

Supermicro X9DA7

SMC Version

This item displays the SMC version of the BIOS ROM used in this system.

SMC Build Date

This item displays the date that the BIOS Setup utility was built.

Memory Information

Total Memory

This displays the amount of memory that is available in the system.

7-3 Advanced Setup Confi gurations

Use the arrow keys to select Advanced Setup and press <Enter> to access the

following submenu items.



Boot Features

Quiet Boot

This feature allows the user to select bootup screen display between POST mes-

sages and the OEM logo. Select Disabled to display the POST messages. Select

Enabled to display the OEM logo instead of the normal POST messages. The op-

tions are Enabled

and

Disabled

Содержание Supero 7047A-73









































































































Результаты поиска

Содержание Supero 7047A-73

Отзывы:

Supermicro Supero 7047A-73, Руководство пользователя, Страница: 75 / 104

Результаты поиска

Содержание Supero 7047A-73

Отзывы: