Supermicro SuperBlade SBM-GEM-X2C+, Руководство пользователя

Страница: 93 / 404

5-13
Chapter 5: Ethernet Modules
LED Indicators
LED indicators for the SBM-XEM-X10SM 10-Gigabit Ethernet switch module are listed
and described in
Table B-4 of Appendix B .
Ports
The SBM-XEM-X10SM 10-Gigabit Ethernet switch module contains several
front-mounted ports as described below in
Table 5-6 .
Table 5-17. SBM-XEM-X10SM 10 Gigabit Ethernet Switch Module Features
Feature Description
Chipset Broadcom BCM56820
Internal/External Ports
Internal: Twenty 10-Gbps downlink ports
External: Four (TwinBlade) or Ten (Ten Blade) 10-Gbps uplink ports
(SPF+)
Bandwidth 480-Gbps
Trunking Link Aggregation Support (Full 802.3 ad)
Jumbo Frame Support Up to 9KB
Remote Management Browser-based management or Command Line Interface (CLI)
Protocols
Spanning Tree, Rapid Spanning Tree, Multiple Spanning Tree, IGMP
snooping and 802.1x
Power Consumption
Operating System
Firmware (see Section 3-4: Firmware for the 1/10 Gigabit and 10-Gigabit
Ethernet Switch Modules on page 3-13 for details)
Table 5-18. SBM-XEM-X10SM Ports
Port Description
RS-232 Compatible Serial Port
This port accepts a connector cable for uplink using RS-232
connection to a console.
RJ45 Ethernet Ports
These two ports accept a RJ45 connector for 1-Gbps uplink
communications.
USB Port This port is for a USB connector for switch console communications.
SFP+ 10-Gbps Port
This port accepts a SFP+ Direct Attach connector or fiber with
transceiver for 10-Gbps uplink communications.