Supermicro SuperBlade SBM-GEM-X2C+, Руководство пользователя

Страница: 58 / 404

Superblade Network Modules User’s Manual
3-6
a. Type in your Username in the U
SERNAME
box.
b. Type in your Password in the P
ASSWORD
box and click on L
OGIN
.
The IPMI Blade System screen shown in Figure 3-5 is then displayed.
Figure 3-5. IPMI Blade System Screen
3. Clicking on a gigabit switch module will display the gigabit switch in the Gigabit
Switch panel on the screen (
Figure 3-6 ). You may make changes in the
configuration of the switch module in this panel to your needs.
NOTE: The default username and the default password are both ADMIN . The
Default IP address is https://192.168.100.102 .