Supermicro SuperBlade SBM-GEM-X2C+, Руководство пользователя

Страница: 282 / 404

Superblade Network Modules User’s Manual
7-154
Advanced BGP Configuration
Clicking the A
DVANCED
tab brings up the A
DVANCED
BGP C
ONFIGURATION
page
( Figure 7-135 ), which configures dampening and confederation parameters. The
parameters for this page are shown in Table 7-108 .
Figure 7-135. Advanced BGP Configuration Page
Table 7-108. Advanced BGP Configuration Page Parameters
Parameter Description
Client to Client Reflection
This parameter configures the Route Reflector to support route reflection
to client peers.
By default, the Route Reflector will reflect routes learnt from a client peer to
all other client peers. If required, the administrator can disable this feature
by disabling client-to-client reflection.
If disabled, then the Route Reflector will not advertise routes learnt from a
client peer to other client peers. This occurs when all peers within a cluster
are fully-meshed and the client peer itself is able to advertise routes to
other clients of the route-reflector.
Dampening Half Life Time
This parameter specifies the time (in seconds) after which a penalty is
decreased by half. Once a route has been assigned a penalty, the penalty
is decreased by half after the half-life time.
Dampening Reuse Value
If the penalty associated with a suppressed route falls below this value, the
route is re-used.
Dampening Suppress
Value A route is suppressed when the penalty associated with the route exceeds
this value.