Supermicro SuperBlade SBM-GEM-X2C+, Руководство пользователя

Страница: 263 / 404

7-135
Chapter 7: Layer 2/3 Ethernet Switch Firmware
Virtual Interface
Clicking the V
IRTUAL
I
NTERFACE
tab brings up the OSPF V
IRTUAL
I
NTERFACE
C
ONFIGURATION
page ( Figure 7-120 ). The parameters for this page are shown in
Table 7-93 .
Designated Router This read-only field specifies the IP Address of the Designated Router.
Status
When this parameter is enabled, the interface is advertised as an internal
route to some area. When disabled it denotes that the interface is external
to OSPF.
Figure 7-120. OSPF Virtual Interface Configuration Page
Table 7-93. OSPF Virtual Interface Configuration Page Parameters
Parameter Description
Transit Area ID This parameter specifies the transit area that the virtual link traverses.
Neighbor Router ID This parameter specifies the router ID of the virtual neighbor.
Authentication Type
This parameter allows you to choose MD5 , Simple Password or None as
the authentication type.
Table 7-92. OSPF Interface Configuration Page Parameters (Continued)
Parameter Description