Supermicro SuperBlade SBM-GEM-X2C+, Руководство пользователя

Страница: 262 / 404

Superblade Network Modules User’s Manual
7-134
Interface
Clicking the I
NTERFACE
tab brings up the OSPF I
NTERFACE
C
ONFIGURATION
page
( Figure 7-119 ). The parameters for this page are shown in Table 7-92 .
Figure 7-119. OSPF Interface Configuration Page
Table 7-92. OSPF Interface Configuration Page Parameters
Parameter Description
Interface This parameter specifies the interface index of the port.
Area ID
This parameter indicates the 32-bit integer uniquely identifying the area to
which the interface connects.
Priority
This parameter specifies the priority of this interface, which is used in the
DR election algorithm.
Authentication Type
This parameter allows you to choose MD5 , Simple Password or None as
the authentication type.
MD5 Key ID
This parameter specifies the secret key used to create the message digest
appended to the OSPF packet, if the authentication type is
MD5 .
Authentication Key
This parameter specifies the key required for authentication, if
authentication is enabled on this interface.
IP Address This parameter specifies the IP Address of the OSPF interface.