Supermicro SuperBlade SBM-GEM-X2C+, Руководство пользователя

Страница: 255 / 404

7-127
Chapter 7: Layer 2/3 Ethernet Switch Firmware
Security Settings
Clicking the S
ECURITY
tab brings up the RIP S
ECURITY
S
ETTING
page ( Figure 7-113 ). The
parameters for this page are shown in Table 7-13 .
Figure 7-113. RIP Security Settings Page
Table 7-86. RIP Security Setting Page Parameters
Parameter Description
IP Address
This parameter displays the active RIP interfaces. You can select the
interface for which you want to configure authentication.
Authentication Type
This parameter specifies the authentication type. You can choose No
Authentication , or Simple Password , or the md5 authentication type.
Authentication Key
This parameter specifies the key used for authentication if the
authentication type is other than
No Authentication .