Supermicro SuperBlade SBM-GEM-X2C+, Руководство пользователя

Страница: 153 / 404

7-25
Chapter 7: Layer 2/3 Ethernet Switch Firmware
Syslog
The Syslog link provides configuration controls for the following features:
• "Syslog Configuration" on page 7-25
• "Syslog Mail Configuration" on page 7-26
Syslog Configuration
Clicking the L
OGGING
tab brings up the S
YSLOG
C
ONFIGURATION
page ( Figure 7-20 ),
which allows you to configure logging parameters. The parameters for this page are
shown in
Table 7-9 .
Figure 7-20. Syslog Configuration Page
Table 7-9. Syslog Configuration Page Parameters
Parameter Description
Syslog This parameter enables or disables the Syslog feature.
Server IP Address
This parameter specifies the Syslog server IP address. Make sure the
Server IP is reachable.
Buffer Size The buffer size is specfied in log entries. Max entries buffered is 200 .
Timestamp
This parameter allows you to enable or disable the adding of a timestamp
to the log messages.
Console Log This parameter allows you to enable or disable logging to the console.