9
SBI-7125B-T1 BIOS Setup Manual
5. Security
Choose
Security
from the Phoenix BIOS Setup Utility main menu with the arrow keys.
Security setting options are displayed by highlighting the setting using the arrow keys
and pressing <E
NTER
>. All Security BIOS settings are described in
below.
Table 10. Console Redirection Submenu Menu Options
Menu Option
Description
COM Port Address
This item allows you to specify to redirect the console to Onboard COM A or
Onboard COM B. This setting can also be
Disabled
.
BAUD Rate
This item allows you to select the BAUD rate for console redirection. The options
are 300, 1200, 2400, 9600,
19.2K
, 38.4K, 57.6K, and 115.2K.
Console Type
This item allows you to choose from the available options to select the console
type for console redirection. The options are VT100, VT100 (8bit), PC-ANSI
(7bit),
PC ANSI
, VT100+, and VT-UTF8.
Flow Control
This item allows you to choose from the available options to select the flow
control for console redirection. The options are: None, XON/XOFF, and
CTS/
RTS
.
Console Connection
This item allows you to choose select the console connection: either
Direct
or
Via Modem.
Continue CR after
POST
Choose whether to continue with console redirection after the POST routine. The
options are On and
Off
.
Table 11. Hardware Monitor Submenu Menu Options
Menu Option
Description
CPU Temperature
Threshold
This option allows the user to set a CPU temperature threshold that will activate
the alarm system when the CPU temperature reaches this pre-set temperature
threshold. The options are 70
o
C,
75
o
C
, 80
o
C and 85
o
C.
The hardware monitor provides the following temperature data:
• PECI Agent 1 Temperature
• PECI Agent 2 Temperature
• System Temperature
Voltage Monitoring
The following voltages are displayed:
• VcoreA
• VcoreB
• +1.8V
• P1V5
• +3.3V
• +12V
• 5Vsb
• 5VDD
• P_VTT
• Vbat
