Supermicro SuperBlade SBI-4129P-C2N, Руководство пользователя

Страница: 10 / 96

SBI-4129P-T3N/C2N SuperBlade Module User’s Manual
1-2
1-3 Blade Module Features
Table 1-1 lists the main features of the SBI-4129P-T3N/C2N blade module. See the
proceeding section for components typically included in a blade system and other
optional components. Specific details for the SBI-4129P-T3N/C2N blade module are
found in
Chapter 4: "Blade Module Features" on page 4-1 .
Processors
The SBI-4129P-T3N/C2N SuperBlade module supports two Socket P LBA 3647 Intel
Xeon processor EP series processors grouped two per node.
Refer to the Supermicro web site for a complete listing of supported processors ( http://
www.supermicro.com/products/superblade ). Please note that you will need to check the
detailed specifications of a particular blade module for a list of the CPUs it supports.
Details on installation of the processor into the SBI-4129P-T3N/C2N SuperBlade
module are found in
Chapter 3: "Setup and Installation" on page 3-1 .
Memory
Both the SBI-4129P-T3N/C2N SuperBlade module have sixteen (16) 288-pin DIMM
sockets that can support up to 2 TB of RDIMM/LRDIMM DDR4 2400/2666/3200 MHz
speed, 8 GB, 16 GB, 32 GB, 64 GB and 128 GB size SDRAM 1.2V memory per node.
Memory is interleaved, which requires modules of the same size and speed to be
installed in groups (of two or three).
Please refer to the Supermicro web site for a list of supported memory
(
www.supermicro.com/products/superblade ). The detailed specifications for a blade
module will contain a link to a list of recommended memory sizes and manufacturers.
Table 1-1. SBI-4129P-T3N/C2N SuperBlade Module Specification Features
Mainboard
B11DPT (proprietary form factor)
Chassis Dimensions (HxWxD): 6.54" x 1.69" x 23.14" (166 mm x 43 mm x
588 mm)
Processors
Two Intel
™
Xeon
®
EP series Socket P processors for each node. Please
refer to our web site for a complete listing of supported processors.
UPI Speed UPI up to 11.2 GT/s
Chipset One Intel C620 chip set for each node
Graphics Controller Integrated Aspeed AST 2500 VGA Graphics chip for each node
BIOS 256 Mb SPI Flash EEPROM with AMI® BIOS for each node
Memory Capacity
Supports up to 2 TB of RDIMM/LRDIMM DDR4 2400/2666/3200 MHz
speed and 8 GB, 16 GB, 32 GB, 64 GB and 128 GB size SDRAM memory
in sixteen (16) 288-pin DIMM sockets for each node
Hard Drive Bays
Includes three hot-swap drive bays for 2.5" SATA/SSD disk drives and one
M.2 connector supports 80-mm M.2 SSDs.