Supermicro SUPER P6DNH, Руководство пользователя

Страница: 3 / 44

i i i
Preface
About This Manual
This manual is written for system houses, PC technicians and
knowledgeable PC end users. It provides information for the instal-
lation and use of the SUPER
®
P6DNH/P6DNH2 motherboard, which
supports the 200/180/166/150, >200 MHz Intel
®
Pentium
®
Pro pro-
cessors, and the i960
®
RP IO processor.
The Pentium Pro processor has two 64-bit data buses. One bus
interconnects to the built-in L2 cache and the other is an external
bus that interconnects with the system memory, I/O and the other
processor. Both come with ECC (Error Checking and Correction)
allowing for the correction of single-bit data errors and detection of
2-bit errors on the data bus.
Manual Organization
Chapter 1, Introduction, describes the features, specifications and
performance of the SUPER P6DNH/P6DNH2 system board, pro-
vides detailed information about the chipset, and offers warranty
information.
Refer to Chapter 2, Installation, for a list of the equipment needed
for a system based on the SUPER P6DNH/P6DNH2 system board.
This chapter provides you with the instructions for handling static-
sensitive devices, checking and/or configuring the jumpers. Read
this chapter when you want to install or remove SIMM memory mod-
ules and to mount the system board in the chassis. Also refer to
this chapter to connect the floppy and hard disk drives, USB, IDE
interface, parallel port, serial ports, as well as the cables for the
power supply, reset cable, Keylock/Power LED, speaker and key-
board.