Supermicro SUPER P4SAA, Руководство пользователя

Страница: 51 / 84

Chapter 4: BIOS
4-5
Swap Floppy Drive
This setting allows the user to swap the designation (A and B) of the floppy
disk drives installed in the system (if there are two floppy disk drives
installed on the mainboard). The options are " Disabled " and "Enabled".
Drive A/Drive B
These settings allow the user to set the type of floppy disk drive(s) installed
in the system. The options are "None", "360K, 5.25 in", "1.2M, 5.25 in",
"720K, 3.5 in", "1.44M, 3.5 in" and "2.88M, 3.5 in". Default settings are
"1.44, 3.5" in for Drive A and "None" for Drive B.
Video
Use this setting to specify the type of display you are using with the
system. Options are " EGA/VGA ", "CGA 40", "CGA 80" and "MONO".
Halt On
If the system encounters a non-specified error during boot-up, it will come
to a halt as directed by these settings. You can tell the system to halt on
"All Errors", "No Errors", " All, But Keyboard ", "All, But Diskette" or "All,
But Disk/Key".
Base Memory/Extended Memory/Total Memory
These are displays that inform you how much of each type of memory is
recognized as being present in the system.