Chapter 2: Server Installation
21
Installing the Inner Chassis Rails
Installing the Inner Rails
1. Extend the inner rail toward the front of the rail assembly as far as possible, then
depress the locking tab to pull it completely out.
2. Place the inner rail on the side of the chassis aligning the hooks of the chassis with the
rail extension holes.
3. Slide the extension toward the front of the chassis.
4. You may secure the chassis with screws if desired.
5. Repeat steps 1-3 for the other inner rail.
Figure 2-2. Installing the Inner Rails
2
3
Note:
3U system shown above, rails are common to the SC846.