manualshive.com logo in svg

Supermicro SSE-X3648S, Руководство по установке

Поделиться
Скачать
Supermicro SSE-X3648S Скачать руководство пользователя страница 37

4-3

Chapter 4: Device Installation

Installing the Switch into a Rail Rack

Alternately the SSE-X3648S/SSE-X3648SR switches can be installed in a rail rack with the 
rails provided. For this type of installation, do the following:

Installing the SSE-X3648S/SSE-X3648SR Switches into a Rail Rack

1.

Locate the two screws protruding from each side of the switch.

2.

Slide a rail along each side of the switch so that the two screws slide into the slot in 
middle of each rail. Be sure when installing the rails that the tab at the front end of 
each rail is mounted so it faces outward.

3.

Lift the switch up using two people or a mechanical lift (because of the weight and 
size of the switch, do not attempt installation in a rack by a single person).

4.

Attach the front tabs of the rails to the rack.

5.

Slide the switch forward on the rails until the front of the switch is in front of the rack.

6.

Attach the two shelf brackets to the sides of the front of the switch using the screws 
provided.

7.

Slide the switch back into the rack so that the tabs of the shelf brackets are 
positioned next to the rack.

8.

Fasten the shelf brackets to the rack.

Figure 4-2. SSE-X3648S/SSE-X3648SR Switches Installed in a Rail Rack

Содержание SSE-X3648S















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды