Supermicro SSE-G2252, Руководство пользователя

Страница: 565 / 1401

Chapter 15: Multicast Filtering
Multicast VLAN Registration for IPv6
– 572 –
Figure 15-43: Displaying MVR Statistics – Port
M
ULTICAST
VLAN R
EGISTRATION FOR
IP
V
6
MVR6 functions in a manner similar to that described for MRV (see
“Multicast VLAN Registration for IPv4” on page 555 ).
C
OMMAND
U
SAGE
• General Configuration Guidelines for MVR6:
1.
Enable MVR6 for a domain on the switch, and select the MVR VLAN (see
“Configuring MVR6 Domain Settings” on page 575 ).
2.
Create an MVR6 profile by specifying the multicast groups that will
stream traffic to attached hosts, and assign the profile to an MVR6
domain (see “Configuring MVR6 Group Address Profiles” on page 576 ).
3.
Set the interfaces that will join the MVR as source ports or receiver
ports (see
“Configuring MVR6 Interface Status” on page 579 ).
4.
For multicast streams that will run for a long term and be associated
with a stable set of hosts, you can statically bind the multicast group to
the participating interfaces (see “Assigning Static MVR6 Multicast
Groups to Interfaces” on page 581 ).
C
ONFIGURING
MVR6
G
LOBAL
S
ETTINGS
Use the Multicast > MVR6 (Configure Global) page to configure proxy
switching and the robustness variable.