Supermicro SSE-G2252, Руководство пользователя

Страница: 1283 / 1401

Chapter 41: CFM Commands
– 1297 –
domain-name – Domain name. (Range: 1-43 alphanumeric
characters)
ma-name – MA name. (Range: 1-43 alphanumeric characters)
D
EFAULT
S
ETTING
Disabled
C
OMMAND
M
ODE
Privileged Exec
C
OMMAND
U
SAGE
•
Before using this command to start the cross-check process, first
configure the remote MEPs that exist on other devices inside the
maintenance association using the mep crosscheck mpid command.
These remote MEPs are used in the cross-check operation to verify that
all endpoints in the specified MA are operational.
•
The cross-check process is disabled by default, and must be manually
started using this command with the enable keyword.
E
XAMPLE
This example enables cross-checking within the specified maintenance
association.
Console#ethernet cfm mep crosscheck enable md voip ma rd
Console#
show ethernet cfm
maintenance-points
remote crosscheck
This command displays information about remote MEPs statically
configured in a cross-check list.
S
YNTAX
show ethernet cfm maintenance-points remote crosscheck
[ domain domain-name | mpid mpid ]
domain-name – Domain name. (Range: 1-43 alphanumeric
characters)
mpid – Maintenance end point identifier. (Range: 1-8191)
D
EFAULT
S
ETTING
None
C
OMMAND
M
ODE
Privileged Exec
E
XAMPLE
This example shows all remote MEPs statically configured on this device.
Console#show ethernet cfm maintenance-points remote crosscheck
MPID MA Name Level VLAN MEP Up Remote MAC