Supermicro SSE-G2252, Руководство пользователя

Страница: 1207 / 1401

Chapter 39: Multicast Filtering Commands
MVR for IPv4
– 1220 –
Console#show mvr domain 1 members
MVR Domain : 1
MVR Forwarding Entry Count :1
Flag: S - Source port, R - Receiver port.
H - Host counts (number of hosts joined to group on this port).
P - Port counts (number of ports joined to group).
Up time: Group elapsed time (d:h:m:s).
Expire : Group remaining time (m:s).
Group Address VLAN Port Up time Expire Count
--------------- ---- ----------- ----------- ------ --------
234.5.6.7 1 00:00:09:17 2(P)
1 Eth 1/ 1(S)
2 Eth 1/ 2(R)
Console#
The following example shows detailed information about a specific
multicast address:
Console#show mvr domain 1 members 234.5.6.7
MVR Domain : 1
MVR Forwarding Entry Count :1
Flag: S - Source port, R - Receiver port.
H - Host counts (number of hosts joined to group on this port).
P - Port counts (number of ports joined to group).
Up time: Group elapsed time (d:h:m:s).
Expire : Group remaining time (m:s).
Group Address VLAN Port Up time Expire Count
--------------- ---- ----------- ----------- ------ --------
234.5.6.7 1 2(P)
1 Eth 1/ 1(S)
2 Eth 1/ 2(R)
Console#
show mvr profile
This command shows all configured MVR profiles.
C
OMMAND
M
ODE
Privileged Exec
Table 39-14: show mvr members - display description
Field Description
Group Address Multicast group address.
VLAN VLAN to which this address is forwarded.
Port Port to which this address is forwarded.
Uptime Time that this multicast group has been known.
Expire The time until this entry expires.
Count The number of times this address has been learned by IGMP
snooping.