Supermicro SC842 Series, Руководство пользователя

Страница: 52 / 85

5-12
SC842 Chassis Manual
Installing Expansion Cards
1. Power down the system and remove the power cord from the rear of the
power supply. Remove the cords from both power supplies if your chassis
includes a redundant power module. Remove the chassis cover as described
in Section 5-2.
2. Locate the motherboard port which is aligned with the PCI slot where you
want to install an expansion card.
3. Each PCI slot cover is secured by one screw located on the top of the cover.
Remove this screw and slide the slot cover up and out of the slot. Set the
screw aside for use in Step 5.
4. Gently slide the expansion card into the correct motherboard slot and lock it.
Never force a component into a motherboard or the chassis.
5. Secure the expansion card with the screw set aside in Step 3.
6. Reconnect the power cord(s) to the power supply (and the redundant power
supply if applicable to your chassis model), and power up the system.
Expansion Card Setup
The SC842TQ/i chassis features seven PCI slots which support up to seven ex-
pansion cards. SC842XTQ chassis features eleven PCI slots which support up to
eleven expansion cards.
Figure 5-11. PCI Slots
PCI Slots for
Expansion Cards