background image

SC732 Chassis Manual

1-4

1-5  Returning Merchandise for Service

A receipt or copy of your invoice marked with the date of purchase is required be-
fore any warranty service will be rendered. You can obtain service by calling your 
vendor for a Returned Merchandise Authorization (RMA) number. When returning 
to the manufacturer, the RMA number should be prominently displayed on the 
outside of the shipping carton, and mailed prepaid or hand-carried. Shipping and 
handling charges will be applied for all orders that must be mailed when service 
is complete.
For faster service, RMA authorizations may be requested online (http://www.super-
micro.com/support/rma/).
Whenever possible, repack the chassis in the original Supermicro carton, using the 
original packaging material. If these are no longer available, be sure to pack the 
chassis securely, using packaging material to surround the chassis so that it does 
not shift within the carton and become damaged during shipping.
This warranty only covers normal consumer use and does not cover damages in-
curred in shipping or from failure due to the alteration, misuse, abuse or improper 
maintenance of products. 
During the warranty period, contact your distributor first for any product problems.

Содержание SC732D2-903B



























































Отзывы: