Chassis SC213X User's Manual
36
Replacing the Power Distributor Board
The power distributor provides power supply redundancy and is pre-installed in the chassis.
In the rare event that you have to replace the power distributor, follow the steps below.
Changing the Power Distributor
1. Power down the server as described in Section 3.1.
2. Remove all cable connections to the power distributor board from the motherboard,
backplane, and other components. Also, remove both power supply modules.
3. Remove the screws securing the power distributor, as shown.
Figure 3-12. Installing the Power Distributor Board
4. Pull the power distributor from the chassis. Gently guide all the cables through the
power distributor housing.
5. Slide the new power distributor board cables through the bottom of the housing, then
slide the unit into the housing.
6. Replace the mounting screws, reconnect the power cables, and replace the power
supply modules and power cords.
