Page 1
Chapter 1
SC830W/SC820W CHASSIS
I. Chassis Specifications
Dimensions: 380 x 505 x 570 mm ( W x H x D)
A.
Drive bay: 5.25” x 9, 3.5” x 2
B.
9 expansion slots
C.
lockable side door and front door
D.
Power Supply:
SC830W --Dual Redundant 300W ATX 2.03 compliant
SC820W-- Single Redundant Cooling 400W ATX 2.03 compliant
E.
Maximum board size : 18” x 13”
F.
Cooling system: Two sections of cooling. One cooling system for each chamber of the chassis.
1)
On the Hard Disk Drive side—two of 12-cm exhaust fans.
2)
On the Main board side – There are two cartridges on the front. Inside each cartridge, there are two
cooling fans. Each fan is 9-cm with 3-pin connector.
3)
Two Fan deflectors and two fan door-blocks are also included. These deflectors are designed to
optimize airflow, and the fan-door blocks to prevent hot air from being drawn back.
H. Parts included: Mounting kits, drive bay rails (11 pairs), rubber stands, cables and wires tie wraps.
