8
SBM-25G-P10 User's Manual
3 Management
The SBM-25G-P10 module is managed through the CMM module web interface. It supports
the upload of configuration files, as described later in this manual. Note that CMM version
3.55 or later is required.
The module can be connected to any computer using the RS-232 Console port. This is
generally used to collect debug logs for the Supermicro Technical Support team. The computer
COM port settings should be:
Baudrate: 115200
Data: 8 bit
bit Parity: none
Stop: 1 bit
Flow Control: none
Using the CMM Module web interface, the user can perform the below tasks on the pass-
thru module.
•
Reset
•
Configure management IP (Static/DHCP)
•
Configuration upload
•
Firmware upgrade
