manualshive.com logo in svg

Supermicro SBI-7427R-S2L, Руководство пользователя


Поделиться
Скачать
background image

1-1

Chapter 1

Introduction

1-1

Overview

This user’s manual covers the SBI-7427R-S2L blade module. This blade module is a 
compact self-contained server that connects into a pre-cabled enclosure that provides 
power, cooling, management and networking functions. One enclosure for the 
SBI-7427R-S2L blade module can hold fourteen blade units. 

In this manual, “blade system” refers to the entire system (including the enclosure and 
blades units), “blade” or “blade unit” refers to a single blade module and “blade 
enclosure” is the chassis that the blades, power supplies and modules are housed 
within. 

Please refer to our web site for information on operating systems that have been 
certified for use with the SuperBlade (

www.supermicro.com/products/superblade/

).

Note: 

For your system to work properly, please follow the links below to download all 

necessary drivers/utilities and the user’s manual for your server.

•

Supermicro product manuals: 

http://www.supermicro.com/support/manuals/

•

Product drivers and utilities: 

ftp://ftp.supermicro.com

•

Product safety information: 

http://super-dev/about/policies/safety_information.cfm

•

If you have any questions, please contact our support team at: 

[email protected]

Note: 

A complete list of safety warnings is provided on the Supermicro web site at 

http://www.supermicro.com/about/policies/safety_information.cfm

.

1-2

Product Checklist of Typical Components

Your blade module ships with its B9DRP mainboard already installed in its chassis. 
Memory, hard disk drives and the CPU must all be installed by the user after shipment. 
See 

Chapter 3: "Setup and Installation" on page 3-1

 for details on installation of these 

components.

Aside from the blade module unit itself, the following optional Mezzanine add-on cards 
(with 10GbE or Infiniband Switch) may be ordered for your blade module:

•

AOC-XEH-iN2

•

AOC-IBH-XDD

•

AOC-IBH-XQD

•

AOC-IBH-XQS

•

AOC-IBH-XDS

See the 

Supermicro website

 for more details on these add-on cards.

Содержание SBI-7427R-S2L























































































Отзывы:

Нет отзывов

Похожие инструкции для SBI-7427R-S2L

Yamaha MCX-2000 - MusicCAST Digital Audio Server Owner'S Manual Addendum preview
MCX-2000 - MusicCAST Digital Audio Server
Бренд: Yamaha Страницы: 25
Xerox Legacy 4127 Customer Release Notes preview
Legacy 4127
Бренд: Xerox Страницы: 8
NEC Express5800/320Fa-L User Manual preview
Express5800/320Fa-L
Бренд: NEC Страницы: 406
Axis 27978R1 User Manual preview
27978R1
Бренд: Axis Страницы: 66
IBM 9131-52A Quick Start Manual preview
9131-52A
Бренд: IBM Страницы: 16
IBM Netfinity 5000 Setup And Installation Manual preview
Netfinity 5000
Бренд: IBM Страницы: 24
Telvue HyperCaster User Manual preview
HyperCaster
Бренд: Telvue Страницы: 153
Leightronix UltraNEXUS HD Blade Product Quick Manual preview
UltraNEXUS HD Blade
Бренд: Leightronix Страницы: 5
Sun Microsystems Sun Ray 150 User Manual preview
Sun Ray 150
Бренд: Sun Microsystems Страницы: 121
Fujitsu PRIMERGY Econel 230R S1 Service Supplement Manual preview
PRIMERGY Econel 230R S1
Бренд: Fujitsu Страницы: 53
Fujitsu Primergy ECONEL 100 S2 Start Manual preview
Primergy ECONEL 100 S2
Бренд: Fujitsu Страницы: 8
Fujitsu PRIMERGY Econel 200 S2 Options Manual preview
PRIMERGY Econel 200 S2
Бренд: Fujitsu Страницы: 65
Fujitsu PRIMERGY MX130 S1 Operating Manual preview
PRIMERGY MX130 S1
Бренд: Fujitsu Страницы: 85
Fujitsu PRIMERGY Econel 100 Operating Manual preview
PRIMERGY Econel 100
Бренд: Fujitsu Страницы: 64
Fujitsu primergy h250 Manual preview
primergy h250
Бренд: Fujitsu Страницы: 105
Fujitsu Primergy N800 Manual preview
Primergy N800
Бренд: Fujitsu Страницы: 142
Fujitsu PRIMERGY GX2460 M1 Upgrade And Maintenance Manual preview
PRIMERGY GX2460 M1
Бренд: Fujitsu Страницы: 251
Fujitsu PRIMERGY MX130 S2 Upgrade and maintenance manua Upgrade And Maintenance Manual preview
PRIMERGY MX130 S2 Upgrade and maintenance manua
Бренд: Fujitsu Страницы: 256

Бренды по названию

Популярные бренды

Загрузить еще бренды