manualshive.com logo in svg

Supermicro SBI-7228R-T2F, Руководство пользователя, Страница: 71 / 86

Поделиться
Скачать
Supermicro SBI-7228R-T2F Скачать руководство пользователя страница 71

5-19

Chapter 5: BIOS

5-7

IPMI Setup

5-8

Security

Choose 

Security

 from the BIOS Setup main menu with the arrow keys to bring up the 

S

ECURITY

 S

ETUP

 menu. Security setting options are displayed by highlighting the setting 

using the arrow keys and pressing <E

NTER

>. All Security BIOS settings are described in 

Table 5-16

 below. 

Table 5-15. IPMI Menu 

Menu Option

Description

IPMI Information

IPMI Firmware Revision and IPMI Status information are statically displayed at 
the top of this menu.

System Event Log

Selecting this sub-menu displays settings for changing the SEL Event Log 
configuration. Note: all values changed here do not take effect until the system is 
restarted.

SEL Components

Change this setting to 

Enable

 or Disable all features of the System Event 

Logging during boot-up.

Erase SEL

Use this setting for erasing the SEL. Options are 

No

, Yes On Next Reset and Yes 

On Every Reset.

When SEL is Full

Use this setting to choose options for reactions to a full SEL. Options include 

Do 

Nothing

 and Erase Immediately.

Log EFI Status 
Codes

Use this setting to 

Enable

 or Disable logging of EFI status codes, log only error 

codes or

only progress codes

BMC Network 

Configuration

Use this sub-menu to configure BMC network parameters.

BMC Network 
Configuration 
Information

The sub-menu contains static display information for the Station IP Address, 
Subnet Mask, Station MAC Address and Gateway IP Address.

Update IPMI LAN 
Configuration

Specify Yes or 

No

 for the BIOS to use this setting for IPMI in the next boot-up.

Configuration 
Address Source

This setting allows you to configure LAN channel parameters Statically or 
Dynamically (by BIOS or BMC). Unspecified option will not modify any BMC 
network parameters during the BIOS phase. Options are 

DHCP

 (dynamic) or 

Static.

Table 5-16. Security Menu Options 

Menu Option

Description

Administrator 
Password

This allows you to create an administrator password for the system. 

User Password

This allows you to create user password for the system.

Содержание SBI-7228R-T2F























































































Отзывы:

Нет отзывов