Supermicro SBI-7126TG Скачать руководство пользователя страница 52 | Manualshive

Страница: 52 / 70

Supermicro SBI-7126TG Скачать руководство пользователя страница 52

SBI-7126TG Blade Module User’s Manual

5-10

S.M.A.R.T.

Self-Monitoring Analysis and Reporting Technology (SMART) can help predict
impending drive failures. Select “Auto” to allow BIOS to auto detect hard disk
drive support. Select “Disabled” to prevent AMI BIOS from using the S.M.A.R.T.
Select “Enabled” to allow AMI BIOS to use the S.M.A.R.T. to support hard drive
disk. The options are Disabled, Enabled, and

Auto

.

32-bit Data
Transfer

Select “Enabled” to activate the function of 32-Bit data transfer. Select “Disabled”
to deactivate the function. The options are

Enabled

and Disabled.

Table 5-7. PCI/PnP Configuration Sub-menu

Menu Option

Description

Clear NVRAM

This setting allows you to clear NVRAM during a system boot. The options are

No

and Yes.

Plug & Play O/S

Selecting Yes allows the OS to configure Plug & Play devices. Select

No

to allow

the AMI BIOS to configure all devices in your system.

NOTE:

This is not required for system boot (select

No

) if your system has an OS

that supports Plug & Play.

PCI Latency Timer

This sets the latency timer of each PCI device installed on a PCI bus. For
example, select

64

to set the PCI latency to 64 PCI clock cycles. The options are

32,

64

, 96, 128, 160, 192, 224 an 248.

PCI Cache Line Size

This sets the size of the PCI Cache Dwords/Line. The options are 16, 32,

64

and

128.

PCI IDE BusMaster

When enabled, the BIOS uses PCI bus mastering for reading/writing to IDE
devices. The options are D

ISABLED

and

Enabled

.

SR-IOV Support

This setting Enables or

Disables

SR-IOV Support.

Onboard LAN Option
ROM Select

This setting allows you to select the option for onboard LAN option ROM to either

PXE

or iSCSI. Note: If iSCSI is selected, LAN1 Option ROM select will cover all

other Oboard LANs.

Load Onboard LAN 1
Option ROM

This setting

Enables

or Disables onboard option ROM for LAN1.

Load Onboard LAN 2
Option ROM

This setting

Enables

or Disables onboard option ROM for LAN2.

Boots Graphic
Adapter Priority

This setting allows you to select which graphics controller to use as the primary
boot device. Options include Offboard VGA,

Onboard VGA

or PCI-E Slot 7.

Table 5-6. IDE/SATA Configuration Sub-menu (Continued)

Menu Option

Description

«
...
50
51
52
53
54
...
»

Содержание SBI-7126TG







































































Отзывы:

Нет отзывов