Supermicro SBI-6129P-C3N, Руководство пользователя

Страница: 49 / 101

3-15
Chapter 3: Setup and Installation
Memory Population Guidelines
• All DIMMs must be DDR4.
• Balance memory. Using unbalanced memory topology, such as populating two
DIMMs in one channel while populating one DIMM in another channel, reduces
performance. It is not recommended for Supermicro systems.
• In dual-CPU configurations, memory must be installed in the slots associated with
the installed CPUs.
• Guidelines Regarding Mixing DIMMs
• Populating slots with a pair of DIMM modules of the same type and size results in
interleaved memory, which improves memory performance.
• Use memory modules of the same type and speed, as mixing is not allowed.
• x4 and x8 DIMMs can be mixed in the same channel.
• Mixing of LRDIMMs and RDIMMs is not allowed in the same channel, across
different channels, and across different sockets.
• Mixing of non-3DS and 3DS LRDIMM is not allowed in the same channel, across
different channels, and across different sockets.
• DIMM Construction
• RDIMM ( non-3DS ) Raw Cards: A/B (2Rx4), C (1Rx4), D (1Rx8), E (2Rx8)
• 3DS RDIMM Raw Cards: A/B (4Rx4)
• LRDIMM ( non-3DS ) Raw Cards: D/E (4Rx4)
• 3DS LRDIMM Raw Cards: A/B (8Rx4)
Memory Population Sequence
Blue slots versus black slots: Install the first DIMM in the blue memory slot, which is
the first of a memory channel. Then, if using two DIMMs per channel, install the second
DIMM in the black slot.
The following memory population sequence table was created based on guidelines
provided by Intel to support Supermicro motherboards. The diagram is for illustrative
purposes; your motherboard may look different.