Supermicro SBA-7222G-T2 Скачать руководство пользователя страница 49

Страница: 49 / 74

6-3

Chapter 6: BIOS

Boot Feature

The menu options in the B

OOT

EATURE

submenu and their descriptions are shown in

Table 6-1

Table 6-1. Boot Feature Submenu

Menu Option

Description

Quick Boot

This option allows BIOS to skip certain tests while booting. This will decrease the
time needed to boot the system. Options include

Enabled

or Disabled.

Quiet Boot

When this option is

Enabled

, it displays the OEM Logo instead of POST

messages. When Disabled, it displays normal POST messages.

AddOn ROM Display
Mode

This option sets the display mode for Option ROM. It can be set as either

Force

BIOS

or Keep Current.

Bootup Num-Lock

This option selects the power-on state for the Numlock. It can be set to either

or Off.

PS/2 Mouse Support

Use this option to select support for the PS/2 mouse. Options include

Auto

Enabled or Disabled.

Wait for ‘F1’ If Error

This option sets the system to wait for the F1 key to be pressed if an error
occurs. Options include

Enabled

or Disabled.

Hit ‘DEL’ Message
Display

This option displays the message “Press DEL to run Setup in Post” when
enabled. Options include

Enabled

or Disabled.

Watch Dog Function

This option allows the system to restart when it is not active more than 5
minutes. Options include Enabled or

Disabled

Power Button
Function

This sets the power button function to either

Instant Off

or 4 Second Override.

Restore on AC Power
Loss

This option allows you to specify the action the system will take when there is an
AC power loss. Options include

Power-Off

, Power-On or Last State.

Interrupt 19 Capture

When enabled, this option allows the system’s option ROMs to trap interrupt 19.

Содержание SBA-7222G-T2











































































Результаты поиска

Содержание SBA-7222G-T2

Отзывы:

Похожие инструкции для SBA-7222G-T2

Бренды по названию

Популярные бренды

Supermicro SBA-7222G-T2, Руководство пользователя

Результаты поиска

Содержание SBA-7222G-T2

Отзывы:

Похожие инструкции для SBA-7222G-T2

Бренды по названию

Популярные бренды