Supermicro MicroBlade MBI-6119G-C2, Руководство пользователя

Страница: 40 / 88

MBI-6119G-C2 MicroBlade Modules User’s Manual
3-8
3-5 Memory Installation
The mainboard of each blade unit must be populated with DIMMs (Dual In-line Memory
Modules) to provide system memory.
The DIMMs should all be of the same size and
speed and from the same Super Micro authorized manufacturer due to
compatibility issues.
See details below on supported memory and our web site ( http://
www.supermicro.com/products/microblade/ for recommended memory.
Populating Memory Slots
The mainboard of a MBI-6119G-C2 MicroBlade module has four (4) memory slots. For
optimized memory bandwidth it is strongly recommended that
ALL memory slots in this
MicroBlade module be populated by DIMMs. DIMM layout is shown below in Figure 3-3 .
Note: Though multiple DIMM memory module types and speeds may be supported, you
need to use DIMM memory modules of the same speed and type.
Figure 3-3. 4-slot DIMM Numbering
P1 DIMMA1
P1 DIMMA2
P1 DIMMB2
P1 DIMMB1