Supermicro MBI-6128R-T2, Руководство пользователя

Страница: 9 / 81

1-3
Chapter 1: Introduction
Storage
The MBI-6128R-T2/T2X MicroBlade module has two 2.5" SATA3 HDD/SSD internally
mounted drives and one SATA-DOM drive that it can also use for storage or for
installation of the node’s operating system. See
Chapter 3: " Setup and Installation" on
page 3-1 for storage installation details.
RAID
The MBI-6128R-T2/T2X MicroBlade module has only two hard drives, so only a RAID 0
or 1 array is possible.
Density
A maximum of twenty-eight blade modules may be installed into a single blade
enclosure. Each blade enclosure is a 6U form factor, so a standard 42U rack may
accommodate up to seven enclosures with 196 blade modules, the equivalent of 784 1U
servers. With the inclusion of up to fourteen CMM modules and up to twenty-eight
Gigabit Ethernet switches this would occupy up to 826U space in a conventional 1U
server configuration.
BMC Password
For security, each blade unit is assigned a unique default BMC password for the ADMIN
user. It can be found on a sticker on the blade service tab, and a sticker on the
motherboard. The sticker also displays the BMC MAC address. For more information,
refer to our website at
https://www.supermicro.com/en/support/
BMC_Unique_Password . The service tab and an example sticker are illustrated below.
Service Tab
Password
Sticker