Supermicro Intelligent Switch, Руководство пользователя

Страница: 220 / 913

Release :
1.0
220 / 913
10.11 dot1x timeout
This command sets the dot1x timers and the no form of the command sets the dot1x timers to the default
values.
dot1x timeout {quiet-period <value (0-65535)> | {reauth-period |
servertimeout | supp-timeout | tx-period | start-period | held-period | auth-
period }<value (1-65535)>}
no dot1x timeout {quiet-period | reauth-period | server-timeout | supp-
timeout | tx-period | start-period | held-period | auth-period}
Syntax Description
quiet-period
- Number of seconds that the switch remains in the quiet state following a failed
authentication exchange with the client
reauth-period
- Number of seconds between re-authentication attempts
server-timeout
- Number of seconds that the switch waits for the retransmission of packets by the
switch to the authentication server
supp-timeout
- Number of seconds that the switch waits for the retransmission of packets by the
switch to the client
tx-period
- Number of seconds that the switch waits for a response to an EAP-request/identity frame
from the client before retransmitting the request
start-period
- Number of seconds that the supplicant waits between successive retries to the
authenticator
held-period
- Number of seconds that the supplicant waits before trying to acquire the authenticator
auth-period
- Number of seconds that the supplicant waits before timing-out the authenticator
Mode
Interface Configuration Mode
Defaults
quiet-period - 60 seconds
reauth-period - 3600 seconds
server-timeout - 30 seconds
supp-timeout - 30 seconds
tx-period - 30 seconds
start-period - 30 seconds
held-period - 60 seconds