Supermicro H8QG6+-F, Руководство пользователя

Страница: 55 / 84

Chapter 4: BIOS
4-3
Secure Virtual Machine Mode
This setting is used to Enable or Disable SVM.
Power Now
This setting is used to Enable or Disable the AMD Power Now feature.
ACPI SRAT Table
This option Enables or Disables the building of the ACPI SRAT Table.
Clock Spread Spectrum
This option should remain Disabled for normal operation. The driver developer
may enable it for testing purposes.
IDE Confi guration
Onboard PCI IDE Controller
This setting allows you to set the options for the PCI IDE controller. Options
include Disabled, Primary, Secondary or Both .
Primary/Secondary/Third IDE Master/Slave
LBA/Large Mode
LBA (Logical Block Addressing) is a method of addressing data on a disk
drive. The options are Disabled and Auto .
Block (Multi-Sector Transfer)
Block mode boosts IDE drive performance by increasing the amount of data
transferred. Only 512 bytes of data can be transferred per interrupt if block
mode is not used. Block mode allows transfers of up to 64 KB per interrupt.
Select "Disabled" to allow the data to be transferred from and to the device
one sector at a time. Select "Auto" to allows the data transfer from and to the
device occur multiple sectors at a time if the device supports it. The options
are Auto and Disabled.
PIO Mode
PIO (Programmable I/O) mode programs timing cycles between the IDE drive
and the programmable IDE controller. As the PIO mode increases, the cycle
time decreases. The options are Auto , 0, 1, 2, 3, and 4. Select Auto to allow
BIOS to auto detect the PIO mode.