Supermicro H8DSP-8 Скачать руководство пользователя страница 59

Страница: 59 / 72

Chapter 4: BIOS

4-13

The other items in the submenu are all systems monitor displays for the follow-

ing information:

CPU1 Temperature, CPU2 Temperature (for dual CPU systems), System Tem-

perature, CPU1 Vcore, CPU2 Vcore (for dual CPU systems), +5 Vin, +12Vin,

-12V Vcc, DDRA VTT, DDRB VTT, 1.2V for Hyper-Transport, 2.5V, 5V standby,

2.5V standby and battery voltage.

System Fan Monitor

Fan Speed Control Modes

This feature allows the user to determine how the system will control the

speed of the onboard fans. If the option is set to "3-pin fan", the fan speed

is controlled based upon the CPU die temperature. When the CPU die

temperature is higher, the fan speed will be higher as well. If the option is

set to "4-pin", the fan speed will be controlled by the Thermal Management

Settings pre-conﬁ gured by the user with this setting. Select "3-pin" if your

chassis came with 3-pin fan headers. Select "4-pin" if your chassis came

with 4-pin fan headers. Select "Workstation" if your system is used as a

Workstation. Select "Server" if your system is used as a Server. Select

"Disable" to disable the fan speed control function to allow the onboard fans

to continuously run at full speed (12V). The options are

1) Disable, Full

Speed

and 2) Server Mode.

FAN1 Speed through FAN10 Speed

The speeds of the onboard fans (in rpm) are displayed here.

4-4 Boot

Menu

Boot Settings Conﬁ guration

Quick Boot

If Enabled, this option will skip certain tests during POST to reduce the time

needed for the system to boot up. The options are

Enabled

and Disabled.

Quiet Boot

Disabled

, normal POST messages will be displayed on boot-up. If Enabled,

this display the OEM logo instead of POST messages.

Содержание H8DSP-8









































































Результаты поиска

Содержание H8DSP-8

Отзывы:

Похожие инструкции для H8DSP-8

Бренды по названию

Популярные бренды

Supermicro H8DSP-8, Руководство пользователя

Результаты поиска

Содержание H8DSP-8

Отзывы:

Похожие инструкции для H8DSP-8

Бренды по названию

Популярные бренды