Chapter 4: UEFI BIOS
71
Erasing Settings
Erase SEL
Select Yes, On next reset to erase all system event logs upon next system reboot. Select
Yes, On every reset to erase all system event logs upon each system reboot. Select No
to keep all system event logs after each system reboot. The options are
No
, Yes on next
reset, and Yes on every reset.
When SEL is Full
This feature allows the user to decide what the BIOS should do when the system event
log is full. Select Erase Immediately to erase all events in the log when the system event
log is full. The options are
Do Nothing
and Erase Immediately.
Note:
After making changes on a setting, be sure to reboot the system for the changes to
take effect.
BMC Network Configuration
BMC Network Configuration
Update IPMI LAN Configuration
Select Yes to enable BMC Network Configuration.
IPMI LAN Selection
This item displays the IPMI LAN setting. The default setting is
Dedicated
.
IPMI Network Link Status
This item displays the IPMI Network Link status. The default setting is
Dedicated LAN
.
Configuration Address Source
This feature allows the user to select the source of the IP address for this computer. If Static
is selected, you will need to know the IP address of this computer and enter it to the system
manually in the field. If DHCP is selected, the BIOS will search for a DHCP (Dynamic Host
Configuration Protocol) server in the network that is attached to and request the next available
IP address for this computer. The options are Static and
DHCP
.
*If the item above is set to Static, the following items will become available for
configuration:
Station IP Address
This item displays the Station IP address for this computer. This should be in decimal and
in dotted quad form.
Subnet Mask
This item displays the sub-network that this computer belongs to. The value of each three-
digit number separated by dots should not exceed 255.
