Chapter 4: UEFI BIOS
65
Memory Configuration
Memory Clock
This setting allows you to select different memory clock speed. The options are
Auto
,
2666MHz, 2933MHz and 3200MHz.
Memory Interleaving
This setting controls fabric level memory interleaving. Note that the channel, die and socket
have requirements on memory populations and it will be ignored if the memory doesn't
support the selected option. The options are Enabled, Disabled and
Auto
.
Memory Interleaving Size
This setting controls the memory interleaving size. This determines the starting address of
the interleave (bit 8, 9, 10 or 11). The options are 256 Bytes, 512 Bytes, 1 KB, 2 KB and
Auto
.
Chipselect Interleaving
This setting controls interleave memory blocks across the DRAM chip for node 0. The
options are Disabled and
Auto
.
BankGroupSwap
This setting controls the Bank Group Swap. The options are Enabled, Disabled and
Auto
.
DRAM Scrub Time
This setting provides a value that is the number of hours to scrub memory. The options are
Disabled, 1 hour, 4 hours, 8 hours, 16 hours, 24 hours, 48 hours and
Auto
.
CPU1 Memory Configuration
These sections are for informational purposes. They will display some details about the
detected memory according to each CPU on the motherboard, such as:
•
Detected Size (per slot, in MB)
•
Current Speed (MT/s)
CPU2 Memory Configuration
These sections are for informational purposes. They will display some details about the
detected memory according to each CPU on the motherboard, such as:
•
Detected Size (per slot, in MB)
•
Current Speed (MT/s)
