manualshive.com logo in svg

Supermicro FatTwin F629P3-RC0B, Руководство пользователя

Поделиться
Скачать
Supermicro FatTwin F629P3-RC0B Скачать руководство пользователя страница 47

FatTwin F629P3-RTB/RTBN/RC0B/RC1B User's Manual

47

Replacing the Power Supplies 

The F424AS2 chassis includes a 1200 Watt power supply. This power supply is auto-switching 
capable. This enables it to automatically sense and operate at a 100v to 240v input voltage. 
An amber light will be illuminated on the power supply when the power is off. An illuminated 
green light indicates that the power supply is operating.

Power Supply Replacement

The F424AS2 chassis utilizes two redundant power supplies (four in total). In the unlikely event 
that the power supply unit needs to be replaced, one power supply can be removed, without 
powering down the system. Replacement units can be ordered directly from Supermicro (See 
the contact information in the Preface of this manual). 

Changing the Power Supply

1. Press the release tab on the back of the power supply and pull the power supply out 

using the handle provided.

2. Push the replacement power supply module into the power bay until it clicks into the 

locked position.

3. Plug the AC power cord back into the module and return the node to its bay in the 

chassis.

Содержание FatTwin F629P3-RC0B



























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды