76
FatTwin AS -F1114S-FT User's Manual
Memory Configuration
Memory Clock
This setting allows you to select different memory clock speed. Options include
Auto
and
supported frequencies.
Memory Interleaving
This setting controls fabric level memory interleaving. Note that the channel, die and socket
have requirements on memory populations and it will be ignored if the memory doesn't
support the selected option. The options are Disabled and
Auto.
Memory Interleaving Size
This setting controls the memory interleaving size. This determines the starting address of
the interleave (bit 8, 9, 10 or 11). The options are 256 Bytes, 512 Bytes, 1 KB, 2 KB or
Auto
.
Chipset Interleaving
This setting controls interleave memory blocks across the DRAM chip for node 0. The
options are Disabled and
Auto
.
BankGroupSwap
This setting controls the Bank Group Swap. The options are Enabled, Disabled and
Auto
.
DRAM Scrub Time
This provides a value that is the number of hours to scrub memory. The options are
Disabled, 1 hour, 4 hours, 8 hours, 16 hours, 24 hours, 48 hours, and
Auto
.
TSME
Transparent SME. The options are Enabled, Disabled and
Auto
.
CPU1 Memory Information
These sections are for informational purposes. They will display details about the detected
memory according to the CPU, such as:
• Detected Size (per slot, in MB)
• Current Speed (MT/s)
PCIe/PCI/PnP Configuration
This menu provides PCIe/PCI/PnP configuration settings and information.
PCI Bus Driver Version
PCI Devices Common Settings:
